Views: 0 Author: Site Editor Publish Time: 2025-09-04 Origin: Site
Step 1: Install the Posts
Determine the installation area and set the posts at intervals of approximately 3–4 feet. Ensure each post is positioned vertically and buried deep enough to provide strong stability.
Step 2: Unroll and Position the Fence
Carefully unroll the plastic safety fence to prevent folds or tangles. Place the fence vertically against the previously installed posts.
Step 3: Secure the Fence to the Posts
Attach the fence firmly to the posts using zip ties. Each post should have at least three fastening points (recommended at the top, middle, and bottom). Tighten the ties until the fence is held securely without slack. For wider spacing between posts, add additional fastening points to improve overall stability.
Step 4: Trim Excess Material
Once the fence is secured, check the overall installation. Use scissors to neatly trim any excess mesh along the post edges. Ensure the cuts are smooth to avoid sharp edges that may cause injury or snagging
